How to install ceiling light?

How to install ceiling light?

1. Select the location, the first thing to do to install the ceiling light is to determine the installation position of the ceiling light. For example, the ceiling lamps in the living room, dining room, and kitchen are well installed in the middle, so the light is more even in each position. In the bedroom, considering the impact of mosquito nets and light on sleep, try not to install the ceiling lamp above the bed.

In addition, the ceiling light needs to be installed on a wall or ceiling that can bear the weight of the ceiling light, such as a masonry structure. Try not to choose a wooden wall to avoid the danger of falling over time.

2.Removing the ceiling lamp mask, the ceiling lamp mask is removed.Under normal circumstances, the ceiling lamp mask has two fixed ways of rotation and snap-locking.When disassembling, pay attention to avoid damage to the ceiling lamp and remove the mask. Then remove the lamp by the way to prevent the lamp from being broken during installation.

3.Install the base, put the base in the predetermined installation position, mark the wall surface with a pencil, then remove the base, drill a hole at the marked position with an electric drill, and then install the expansion bolts to fix the base in the hole. The burial depth should be consistent with the bolt specifications. Then put the base back to the predetermined position and fix it.

3.After connecting the wires and fixing the base, you can connect the power cord to the terminal block of the ceiling light.It should be noted that the two wires connected to the power cord of the ceiling light should have good electrical contact. Cover the tape and keep a certain distance. If possible, try not to put the two wire ends under the same piece of metal to avoid short circuit and danger.

4. Install the mask and pendant. After connecting the wires, you can try to power on. If everything is normal, you can turn off the power and install the mask of the ceiling lamp. The living room ceiling lamp also needs to be equipped with a series of pendants, because each kind of ceiling lamp pendant is different, so the specific installation method can refer to the product manual. Pendants are generally left over. They can be stored after installation and can be replaced later if needed.