How to remove the ceiling lamp

How to remove the ceiling lamp?

1.How to remove the round ceiling lamp

When disassembling the circular ceiling lamp, you must first look at the type of ceiling lamp installed in the home. The new ceiling lamp has three small buttons next to the lamp holder. When you open the small button, the lamp cover falls off; There are three screws next to the lamp holder. You need to unscrew the screws to remove the lamp cover. The base of the ceiling lamp is fixed to the roof with screws. This is relatively simple when disassembling. You can remove the ceiling lamp by removing the screws directly.

2.How to remove the square ceiling lamp

One type of square ceiling light is an embedded ceiling light. This type of ceiling light is generally fixed directly to the ceiling during interior decoration or the top of the ceiling cannot be seen by nuts, so it is complicated when disassembling it. some. Take the lampshade, the lampshade of the square ceiling lamp should start from his four corners, use the dishwashing hook of the glass suction cup, suck the aluminum alloy part on the side, and slowly pull down (note: each corner must be pulled), Until you remove the lampshade.

3.How to remove the aluminum ceiling board ceiling lamp

Use a small screwdriver or a small thin blade to lift a corner from the seam edge of the aluminum gusset plate, and remove the lamp cover; pull the aluminum gusset plate down in the same way, and take out the bulb.

4.How to remove the embedded ceiling light

The disassembly of this type of ceiling lamp often scares many people. They all think that it is complicated and cannot be dismantled. In fact, think about it carefully. Since it can't fall down on it, there must be something stuck. Yes, so if you look carefully, you will find that there is a spring clip that catches it, as long as you pull it down, remember to turn off the power before taking it.