How to install the ceiling light?

How to install ceiling lamp

1. First punch holes in the kitchen cement ceiling, then knock the plastic gecko into the ceiling hole (if it is a ceiling, you can fix the ceiling plate with screws directly on the ceiling).

2. Connect the test lamp to the power supply. Remove the test lamp cable after normal work, and connect the power cable to the position of the original test lamp cable on the ceiling plate. Make sure that the power cable is effectively connected.

3. Put the flat washer on the screw, and screw the screw clockwise through the hole on the floor into the plastic gecko to tighten the ceiling tray.

4. Fasten the lamp cover to the ceiling plate and rotate the lamp cover clockwise to fix the lamp cover on the ceiling plate.

The above is the relevant information about how the ceiling light is removed and how it is installed. When we understand this problem, we can consider it according to different steps. At the same time, for the ceiling lamp, its wiring arrangement is also very important, not only considering safety issues, but also considering energy saving issues. In addition, for the installation of the lamp, it is necessary to consider its aesthetics. If the light source is not good, it will affect the aesthetics.